Follow along and check off each step as you go — most customers finish in about 7 minutes.
Tap each item as you gather it — a couple of minutes of prep now saves a return later.
Fitting needs no power tools, only a small screwdriver. Do each end of the rod the same way.
Your finials are fitted. Hang your curtains and enjoy the classic finish.
The most common fitting mistakes — and how to avoid them.
If something doesn't feel right after fitting, check here first.
| Symptom | Likely Cause | What To Do |
|---|---|---|
| Finial will not slide onto the rod | The rod is thicker than 1 inch, or the screw is sticking into the socket | Back the screw out slightly and recheck the rod size. If the rod is not 1 inch, message our support team. |
| Finial feels loose or turns | The side screw is not tight enough | Tighten the side screw a little more, gently. |
| Finial wobbles on the rod | It is not pushed fully onto the rod end | Loosen the screw, push the finial all the way on, then tighten again. |
| Screw leaves a mark on the rod | The screw was over-tightened | Loosen it slightly and retighten with less force. |
| Not sure it will fit | The rod size is unknown | Check the rod's diameter, or message our support team before fitting. |
Message our support team with your order details and we'll help you sort it out.