Usage & Care Guide — JKC Tap Cleaner & Limescale Remover

Step 0

Before You Start

Tap each item as you gather it — a minute of prep now makes the whole routine faster.

Tools You'll Need

Rubber gloves (optional, for sensitive skin)
A brush or non-abrasive scrubber
A clean, dry cloth

What's In The Box

1 x JKC Tap Cleaner & Limescale Remover (500ml Foaming Spray Bottle)
Ready-to-Use Trigger Spray Nozzle

Verify before you start: Do a spot test on sensitive or unfamiliar surfaces before full application — this product is not recommended for use on Italian marble or other natural stone without testing first.

Usage

Step-by-Step Usage

Five simple steps get you from hard water stains to a streak-free shine.

Hands full? Have the steps read out loud instead.

0 of 5 steps complete

Nice work — all steps complete!

Repeat this routine weekly to keep hard water stains from building back up.

Shake Well Before Use

~30 sec

Give the bottle a good shake before every use to keep the formula properly mixed.

Spray The Foam On The Affected Area

~30 sec

Spray the foam directly onto the taps, tiles, mirrors, glass or sinks you want to clean.

Take care: Avoid direct contact with eyes, ears, nose, mouth and skin while spraying.

Let It Sit (30–60 Seconds)

~1 min

Give the foam time to work — 30 seconds for light deposits, up to 60 seconds for heavier scale buildup.

Scrub Clean

~1 min

Scrub the area with a brush or non-abrasive scrubber to lift the loosened limescale.

Take care: For sensitive or unfamiliar surfaces, do a spot test before full application.

Rinse & Check The Shine

~1 min

Rinse thoroughly with water and wipe dry with a clean cloth for a streak-free finish.

Points To Take Care Of

Do's & Don'ts

The most common usage mistakes — and how to avoid them.

Do

Shake the bottle well before every use
Spot-test on sensitive or unfamiliar surfaces first
Use in a ventilated area
Wear gloves if you have sensitive skin
Wait the full time for heavy buildup before scrubbing

Don't

Don't use on Italian marble or natural stone without a spot test
Don't mix with other cleaning chemicals
Don't let the spray reach your eyes, ears, nose or mouth
Don't skip the rinse step — residue left behind can feel slippery
Don't store in direct sunlight or a hot spot

Quick Reference

Troubleshooting

If something doesn't look or feel right after cleaning, check here first.

Symptom	Likely Cause	What To Do
Stains aren't fully gone after one pass	Buildup was heavier than a single application clears	Repeat the spray-wait-scrub-rinse cycle once more
Spray isn't foaming properly	Nozzle needs priming	Pump the trigger a few times before the first use
Surface feels slightly slippery after cleaning	Residue not fully rinsed off	Rinse again with more water and wipe dry
Not sure if it's safe for a specific surface	Surface type not covered on the label	Do a spot test in a hidden area, or contact support
Mild irritation after contact	Sensitive skin/surface reaction	Rinse the area with water immediately; contact support if irritation persists

Still need a hand?

Message our support team with your order details and we'll help you sort it out.

+91 97269 54303

WhatsApp support · jkcemart.in